Revolutionizing Fire Safety: Fire dampers Installed Without Horizontal Metal Studs.
We are the only ones in the market offering fire dampers, including the CR60, CR120, CU-LT, and CR2, with the required EN 1366-2 classification for installation without horizontal metal studs in flexible walls.
Avoid rejections during fire inspections.
No Horizontal Metal Studs Needed:
Tested on a standard 100mm gypsum board wall
Contrary to traditional practices, our fire dampers have proven that they can be installed without horizontal metal studs, eliminating the risk of installation rejection.
Minimum Distances
When sealing with standard plaster or hard mineral wool panels, it is possible to install the fire damper at a shorter distance from the ceiling.
Tested according to EN 1366-2
This standard specifies the test methods for fire dampers. It includes performance criteria for fire resistance and integrity of fire dampers under various conditions.
Installation options.
|
Wall type
|
Sealing
|
CR60
|
CR120
|
CR2
|
CU-LT
|
||||
|---|---|---|---|---|---|---|---|---|---|
|
Metal stud plasterboard wall Type A (EN 520) ≥ 100 mm |
Plaster |
EI 60 S |
EI 60 S |
EI 60 S |
EI 60 S |
||||
|
Coated Stone wool + coating ≥ 140 kg/m³ |
EI 60 S |
EI 60 S |
EI 60 S |
- |
|||||
|
Coated stone wool + coating ≥ 140 kg/m³ + coating on tunnel |
- |
- |
- |
EI 60 S |
|||||
|
IFW |
- |
- |
- |
EI 60 S |
|||||
|
Metal stud plasterboard wall Type F (EN 520) ≥ 100 mm |
Plaster |
EI 90 S |
EI 90 S |
EI 120 S |
EI 90 S |
||||
|
Coated stone wool + coating ≥ 140 kg/m³ |
EI 90 S |
EI 90 S |
EI 90 S |
- |
|||||
♦ Our trusted classifications are now also available without the placement of horizontal metal studs.
♦ Installation of the fire damper without the placement of horizontal metal studs is possible provided that a coating is applied to the tunnel.
For the above-mentioned installation methods, it is not necessary from a fire safety perspective to apply reinforcement profiles around the wall opening.
However, the wall as a whole must always meet the stability requirements of the wall system manufacturer.
Why Choose
Rf-technologies ?
Avoidance of Rejections in Fire Inspections: Thanks to our tested fire dampers, these can be installed without horizontal studs in a flexible wall, avoiding the risk of rejection in fire inspections.
Efficient Construction Planning: Reduce minimum distances and optimize construction planning with our innovative fire safety solutions.
Open to innovation, closed to fire.
Our range includes fire dampers, butterfly valves, smoke control dampers, controllers, fire-resistant ventilation grilles, fire-resistant sleeves, and sealing materials.
Our compartmentation and smoke control products ensure the fire safety of various commercial and institutional buildings throughout Europe, including office buildings, hospitals, museums, government buildings, and shopping centers.
