Our MARKAGE FD is a EI90S-classified rectangular multi-blade fire damper for wall mounting in light and rigid walls. The FD is available in small to very large sizes.

The slimline profile of the MARKAGE FD brings a number of benefits, both in the design and installation stage:

  • Its slimline dimensions with no protruding damper blades makes the MARKAGE FD the ideal fire damper for installations with space restrictions but, eventually high air flow requirements;
  • Installation is possible next to 90° bends or T-junctions without interfering with the net section of the adjacent duct;
  • Installation is possible on installations including a grill on one end of the damper.

 

The larger dimensions of the MARKAGE FD allow for catering high flow requirements in just one or a limited number of slimline fire damper(s). Larger dimensions reduce the need for battery assemblies when dealing with high air flow requirements:

  • Easier to plan and calculate;
  • Easier to install and connect;
  • Only 1 point of connection for power, monitoring and controlling;
  • Combined with the benefits of a slimline design without protruding damper blades.
MARKAGE FD vs CU2/B (battery assembly till W2400 x H1000 mm

The larger dimensions of the MARKAGE FD allow for catering high flow requirements in just one or a limited number of slimline fire damper(s). Larger dimensions reduce the need for battery assemblies when dealing with high air flow requirements:

  • Easier to plan and calculate;
  • Easier to install and connect;
  • Only 1 point of connection for power, monitoring and controlling;
  • Combined with the benefits of a slimline design without protruding damper blades.

Product features & benefits

  • Compact at only 250mm deep with no protruding damper blades;
  • CE-certified according EN15650:2010;
  • Tested according EN1366-2 & classified according EN13501-3;
  • 90’ classifications in gypsum board wall systems and massive walls
  • Suitable for both vertical and horizontal axis orientations (0°, 90°, 270° & 360°)
  • Available in a range from W200 x H200 to W1,000 x H2,400 mm
  • Net sections spanning from 0.034 to 2.04 m²
  • Actuator compartment allows addition of communication field devices
  • Installation aids provided

Typical applications

  • Compartmentation for HVAC-installations with high airflow demands;
  • Potentially for scenarios involving duct on one side and a grill on the other end, such as car parks, exhibition or sports facilities, and large technical rooms;
  • Compartmentation for HVAC-installations with limited available space in shafts or for
    connecting to ducting bends without conflicts from protruding damper blades
  • For small to very large sizes

Classifications

The MARKAGE FD has following classifications (for range 200 x 200 till 1.000 x 2.400mm): 

In light & massive wall 100mm: EI 90 (ve i<->o) S (300Pa)

In combination with:

  • ≥100mm GKF (EN520) Gypsum board wall system 
  • ≥100mm aerated concrete wall ≥550kg/m3
  • Sealed with mortar (MW) or coated HD stonewool boards ≥140kg/m3 (LW & MW) 
  • 0, 90, 180 & 270° axis orientation

Go to the Markage FD product page on our website to find all relevant information and documents of this new product: range and dimensions, operation and mechanisms, options and kits, installation and classifications.

The MARKAGE FD comes in the following range:

  • 200 x 200 – 1.000 x 2.400 mm;
  • Width per 50mm, height in steps of 200mm.

The new FD is equipped with BELIMO fire damper actuators BFL, BFN and BF in 24V, 24V-ST and 230V-versions. From H1.200mm on, actuation is achieved by combining multiple Belimo actuators (number and actuators used are height dependent).